Purchase Marshal CO2 BB Revolver

Type: BB Pistol.
Manufacturer: Distributed by AirVenturi.
Model: John Wayne Marshal.
Materials: Mostly plastic, some internal metal parts.
Weight: 1 pound (455 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.55 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm steel BBs.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 420.

Trigger Pull: The trigger pull on the John Wayne Marshal CO2 BB Revolver is a single action only trigger, so you will have to cock the hammer back with each shot which does take away most of the trigger pull length and weight, making the Marshal trigger short and light and easy to shoot. Ideal for slowed down accurate shot placement, but less effective as an action shooter unless you have a very quick thumb!

Accuracy: First up for our velocity fps test of the John Wayne Marshal CO2 BB Revolver, we shot 5 rounds through our Chronograph. The slowest fps was 354 and the fastest shot hit an fps of 368, this result averaged 358 fps which was a somewhat under the claimed “up to” 420 fps from AirVenturi, still an OK velocity for shooting pop cans and the likes up to 30-40 feet away. The temperature in the Sea Can was about 20 degrees Celsius which is around 68 degrees Fahrenheit, so a good temperature to get middle of the road performance from a CO2 Airgun like the John Wayne Marshal CO2 BB Revolver. In warmer temperatures you can expect higher velocities. We then placed our paper target on our pellet trap 30 feet downrange and using our standard semi rested shooting position (hands rested on a sandbag up front and sitting on a stool in the back), we proceeded to shoot 10 rounds into the target with the John Wayne Marshal CO2 BB Revolver and we were able to get about a 4 inch grouping well centered up and down but pushed to the left about 3 inches. We are not sure why this shot grouping spread out so much for us as our Crosman Fortify CO2 BB Revolver gave us a much better grouping and these guns are literally the same gun with different branding being the only real differences. Maybe we were just off on this day? Hey it happens sometimes!

Build Quality: When it comes to the build for the John Wayne Marshal CO2 BB Revolver, there is not a lot to get overly excited about. It is basically a mostly all plastic gun with some metal parts internally like the barrel, trigger, hammer and CO2 area. The John Wayne Marshal has that lower cost Airgun, two halves, screwed together build which generally looks better on the side without the screws showing. As it is mostly plastic it is on the light side at around just over a pound. Overall there are not a lot of moving parts so it should be reliable enough just for that reason alone. All the mechanical components do what they need to do and feel solid enough.

Realism: The John Wayne Marshal CO2 BB Revolver at a glance looks a lot like a Colt Single Action Army Revolver, it has the same shape and size but the weight is much less at about half. The lack of actual bullet holes in the cylinder looking from the front of the revolver does take away from its realism. We guess we are really used to the new generation revolvers with working cylinders and real loadable and removable shells, but these guns are more expensive and hold less ammo as they are genuine to the 6 shooter capacity.

Pros:

A decent looking replica of a Colt Single Action Army revolver.
Single action only trigger is short and light and well suited to careful shot placement shooting.
420 claimed fps is about perfect for plinking at ranges up 30-40 feet.
18 round magazine has a nice high capacity and easy to load when empty
Safety is well thought out and built into an already existing part of the gun rather than simply adding a switch afterwards.
We like the look with the all back frame and bone white grips.
CO2 Allen key is built into grip so you always have it on hand and will not lose it.
John Wayne licensed for those old west John Wayne fans.

Cons:

Mostly plastic builds makes it a bit light in the hand.
No fake shell holes in the front of the cylinder, could have added this for a more genuine look.
Twice the price of the Crosman Fortify which is basically the same Airgun.

Comments: The John Wayne Marshal CO2 BB Revolver is for sure an option if you are looking for an old west single action cowboy BB shooter and specifically if you are a John Wayne fan. If you don't care about the John Wayne licensing and want to save about half of the price then my recommendation is to go for the Crosman Fortify as it is the same exact CO2 BB Revolver at the end of the day minus the john Wayne licensing on it. You also have the option of buying one of the many Shell Loading Single Action Army Revolvers available but they are a bit more money and will shoot a little slower with less ammo capacity but the trade of is a lot more realism.

Buy the CO2: NSS1000-0002.
Buy the Ammo: GS1082.

Specification	Value
Caliber:	4.5 mm (.177 cal)
Action:	Revolver
FPS:	300 to 350
Ammo Type:	Steel BB
Power Source:	Co2
GunAmmoWeight:	.13g
Trigger Action:	Single
GunSafety:	Manual
GunFrontSight:	Blade
GunRearSight:	Fixed
Barrel Length:	5.08 cm (2 Inch)
Magazine Capacity:	18

Have you used this product?
Rate it now.

John Wayne Marshal CO2 BB Revolver Table Top Review

283 - 6/15/2024 9:26:36 PM

www.replicaairguns.com Type: BB Pistol. Manufacturer: Distributed by AirVenturi. Model: John Wayne Marshal. Materials: Mostly plastic, some internal metal parts. Weight: 1 pound (455 grams). Total Length: 10.5 inches (26.6cm). Barrel: 5.55 inches 14cm) metal non-rifled. Propulsion: CO2. Action: Revolver SAO. Ammunition Type: 4.5mm Steel BB’s. Ammunition Capacity: 18 round internal magazine. FPS: Claimed 420. The John Wayne Marshal CO2 BB Revolver is for sure an option if you are looking for an old west single action cowboy BB shooter and specifically if you are a John Wayne fan. If you don't care about the John Wayne licensing and want to save about half of the price then my recommendation is to go for the Crosman Fortify as it is the same exact CO2 BB Revolver at the end of the day minus the john Wayne licensing on it. You also have the option of buying one of the many Shell Loading Single Action Army Revolvers available but they are a bit more money and will shoot a little slower with less ammo capacity but the trade of is a lot more realism. Read my full written review here: www.replicaairguns.com/posts/2024/6/14/john-wayne-marshal-co2-bb-revolver-table-top-review Buy the John Wayne Marshal CO2 BB Revolver in Canada: https://www.replicaairguns.ca/marshal-co2-bb-revolver Buy the John Wayne Marshal CO2 BB Revolver in the US: https://www.replicaairguns.us/marshal-co2-bb-revolver

John Wayne Marshal CO2 BB Revolver Field Test Review

170 - 6/22/2024 7:19:15 PM

www.replicaairguns.com Type: BB Pistol. Manufacturer: Distributed by AirVenturi. Model: John Wayne Marshal. Materials: Mostly plastic, some internal metal parts. Weight: 1 pound (455 grams). Total Length: 10.5 inches (26.6cm). Barrel: 5.55 inches 14cm) metal non-rifled. Propulsion: CO2. Action: Revolver SAO. Ammunition Type: 4.5mm Steel BB’s. Ammunition Capacity: 18 round internal magazine. FPS: Claimed 420. The John Wayne Marshal CO2 BB Revolver is a lower cost mostly plastic Single Action Army Revolver with a fair amount of plastic in the build, but it does feel fairly well built and fairly solid other than being a bit lighter weight. It should produce close to 400 fps velocities in warmer conditions which is more than enough for plinking and pop can shooting which is really what it is built for. I do have to mention that this John Wayne Marshal CO2 BB Revolver for whatever reason is double the price of the Crosman Fortify CO2 BB Revolver I reviewed earlier, so if you don’t care about the John Wayne Licensing, than maybe consider the Crosman version for a lower priced option. Read my full written review here: www.replicaairguns.com/posts/2024/6/21/john-wayne-marshal-co2-bb-revolver-field-test-review Buy the John Wayne Marshal CO2 BB Revolver in Canada: https://www.replicaairguns.ca/marshal-co2-bb-revolver Buy the John Wayne Marshal CO2 BB Revolver in the US: https://www.replicaairguns.us/marshal-co2-bb-revolver

Marshal CO2 BB Revolver

CO2

Ammo

Targets

Holsters

Maintenance

John Wayne Marshal CO2 BB Revolver Table Top Review

John Wayne Marshal CO2 BB Revolver Field Test Review