Schofield No. 3 CO2 BB/pellet revolver



Total: $184.99

Type: Pellet Pistol
Manufacturer: Bear River
Model: Schofield No. 3
Materials: Metal & Polymer
Weight: 1.1 kg (2.4 lb)
Barrel: 178 mm (7 in), smoothbore
Power Source: 12g CO2 x 1
Action: Revolver, single action
Ammo Type: 4.5mm steel BBs
Ammo Capacity: 6 rounds
FPS: 445

Buy the cartridges: AVT1048, AVT1049

Trigger Pull: It's what you would expect from a pistol of this design. Like the Colt Single Action Army, the trigger pull is very short, light and crisp. Perfect for taking your time and getting a precise shot on target. You will have to cock the hammer manually before each shot, so no real action shooting.

Accuracy: I first shot 3 rounds of BBs averaging 369 FPS. I then loaded up with .177 caliber lead pellets and got a similar 361 FPS average. Both rounds performed about the same shooting at my paper target 30 feet away. I found the Schofield shot fairly close to the bullseye, but with both the steel BBs and lead pellets I got one outlier that spread out my groupings significantly. The other 5 rounds were all close, being about 2 inches apart. Perhaps it was a bad or misshaped round, or maybe even me ;). I did notice the lead pellets had a nice 4 round group out of the 6 that all fell within the bullseye. Hard to say if BBs or pellets performed better than the other in my testing.

Build Quality: The Schofield No. 3 is built like the Webley MKVI line. Perhaps even made in the same factory in Taiwan? The Schofield No. 3 Revolver is pretty much all metal construction other than the plastic grips and any internal seals. The fit and finish is excellent with a great overall weight in the hand. The pistol grips are a lot like the Colt Single Action Army's, but the Schofield's a lot more front end heavy because of its beefy barrel.

Realism: In terms of replicating a real steel Schofield No. 3, this BB/pellet revolver sure looks and feels the part. The recessed barrel and hidden CO2 screw don’t give anything away that this airgun version is not the real deal. But as with all shell-loading airgun revolvers, the shells are actually closer to a .380 caliber in diameter rather than a .45, which is what the real steel Schofield would be designed to have.

Pros:

  • Full metal receiver with polymer faux wood grips
  • Faithful replica of the classic 1875 S&W No. 3 Schofield Revolver
  • Top break design makes reloading easy
  • Fits into standard revolver gunbelts and holsters

Cons:

  • No rail mounts for accessories
  • Low ammo capacity means more reloading time

Comments: Yet another classic shell-loading CO2 BB revolver, the more the merrier in my opinion! The Schofield No. 3 is a hefty revolver, but the pistol grip is not super large so even people with smaller hands shouldn't have a problem shooting. The real problem is deciding which shell-loading airgun revolver to buy now since we have so many to choose from… Classic or modern, nickel or black, or perhaps weathered? Overall, the revolver shot well for me. The trigger is nice, short and light, making shot-placing easy. Because of its single action only trigger, you need to reset between every shot, which can affect groupings. Since the barrel isn't rifled, you can shoot whatever ammo type you feel like shooting with no danger of damaging the rifling.

SpecificationValueValueValueValueValueValue
Colour:NickelMetalAgedNickelAgedBlack
Caliber:4.5 mm (.177 cal)4.5 mm (.177 cal)4.5 mm (.177 cal)4.5 mm (.177 cal)4.5 mm (.177 cal)4.5 mm (.177 cal)
FPS:350 to 400350 to 400350 to 400350 to 400350 to 400350 to 400
Ammo Type:Steel BBSteel BBSteel BBSteel BBSteel BBSteel BB
Power Source:Co2Co2Co2Co2Co2Co2
Trigger Action:SingleSingleSingleSingleSingleSingle
Blowback Action:Non-BlowbackNon-BlowbackNon-BlowbackNon-BlowbackNon-BlowbackNon-Blowback
GunSafety:ManualManualManualManualManualManual
GunFrontSight:BladeBladeBladeBladeBladeBlade
GunRearSight:FixedFixedFixedFixedFixedFixed
Material:Metal & Polymer
Barrel Length:17.8 cm (7 inch)17.8 cm (7 inch)17.8 cm (7 inch)12.7 cm (5 inch)12.7 cm (5 inch)12.7 cm (5 inch)
Magazine Capacity:666666
Options:7" Barrel7" Barrel7" Barrel5" Barrel5" Barrel5" Barrel

Have you used this product?
Rate it now.

Umarex Mod 92 A1 and 1911 Tac Airsoft - Barra Schofield Steel BB Pistol Update Video

Umarex Mod 92 A1 and 1911 Tac Airsoft - Barra Schofield Steel BB Pistol Update Video

0
0
0
354 - 9/24/2021 5:44:16 PM

www.ReplicaAirguns.com In this Vimeo Replica Airguns Update Video I take a look at three CO2 Airguns, one is a 4.5mm Steel BB revolver distributed by Barra and two are CO2 Blowback Airsoft Pistols distributed by Umarex. All of these CO2 Airguns I have previously reviewed in slightly different versions either barrel length and finish or Steel BB as compared to 6mm Airsoft So checkout why other reviews on similar version Airguns. The Barra Barra Schofield CO2 BB Revolver is a replica of the Schofield No. 3 single action revolver and utilizes 6 reloadable shells for a very realistic shooting experience. It is very solid in construction bing made mostly out of metal and weighs in at around 2.4 pounds. This version shots 4.5 mm Steel BBs at a velocity of up to 400 fps. It comes in a variety of barrel lengths and finishes so amen sure to have a look in our Online Replica Airguns Store for what we have available… Read the full Article Here: https://www.replicaairguns.com/posts/2021/9/23/umarex-mod-92-a1-and-1911-tac-airsoft-barra-schofield-steel-bb-pistol-update-video Buy the Barra Barra Schofield CO2 BB Revolver: https://www.replicaairguns.ca/search?q=Schofield Buy the Umarex Beretta Pietro Mod. 92 A1 CO2 Blowback Semi and Full Auto Airsoft Pistol: https://www.replicaairguns.ca/beretta-m92-blowback-co2-airsoft-pistol Buy the Umarex Elite Force 1911 Tac CO2 Blowback Airsoft Pistol: https://www.replicaairguns.ca/elite-force-1911-tac-airsoft-pistol


How are we doing? Give us feedback about this page.