Webley & Scott Mark VI .177 Cal. CO2 Service Revolver



Total: $309.99

Type: Pellet Revolver
Manufacturer: Webley & Scott
Model: Mark VI
Materials: Mostly metal with plastic grips
Weight: 1.1 kg (2.4 lb)
Length: 285.75 mm (11.25 in)
Barrel: 152.4 mm (6 in), non-rifled
Power Source: 12g CO2 x 1
Action: Revolver, single and double action
Ammo Type: .177 pellets
Ammo Capacity: 6 rounds
FPS: 430

Buy the cartridges: AVT1049

Trigger Pull: Great in both single and double action. For a shell-loading revolver, the double action is the best I've come across, with next to no friction like I'd usually find with these kind of revolvers.

Accuracy: I averaged 351 FPS with fairly heavy lead pellets which is not bad! In warmer conditions or using lower weight, higher velocity pellets I'm sure the FPS will get up and over 400 FPS. I was very impressed with how well-centered the Webley MKVI shot, I even got 3 rounds right in the bullseye. # of the rounds got outsid eof the bullseye just a bit to the right, resulting in about a 2 inch 6-shot grouping. I'm sure I could tighten this up with more trigger time using this revolver.

Build Quality: The Webley & Scott Mark VI Service Revolver is pretty much all metal construction other than the plastic grips and any internal seals. The fit and finish is excellent, with great overall weight in the hand. The only complaint I have is the grips being a thin plastic, kind of low quality compared to the rest of this otherwise high quality revolver.

Realism: In terms of replicating a real steel MKVI .455, Webley really did a great job with their CO2 pellet-firing version. Webley even included a Small Arms Training Manual based off of the real steel variant. They based the revolver from the original blueprints and the licensing is from the original 1915 version. The only real tell that this is a CO2 revolver would be the small safety switch and the lower right side frame and the CO2 valve located right behind the hammer.

Pros:

  • Built from original blueprints with original 1915 markings
  • Break barrel design makes shell-loading easy
  • Deep recessed barrel with true .455 caliber opening
  • Well-concealed CO2 compartment
  • Great weight and feel in hand at 2.4 pounds
  • Hammer and trigger action is great in single and double action
  • Fairly discreet safety location
  • No ugly warning instructions on the gun!

Cons:

  • Plastic grips seem cheap compared to rest of this high quality gun
  • Could be a bit loud for some backyard shooters

Comments: If you're looking for a beefy shell-loading revolver then consider the Webley & Scott Mark VI Service Revolver line. Both the BB and pellet versions perform well, and the break barrel design makes them super easy to reload without even having to take the shells out if you choose not to. Accuracy and power is up to par and the overall quality is also very good.

SpecificationValueValueValue
Caliber:4.5 mm (.177 cal)4.5 mm (.177 cal)4.5 mm (.177 cal)
Action:RevolverRevolverRevolver
FPS:400 to 450400 to 450400 to 450
Ammo Type:PelletPelletPellet
Power Source:Co2Co2Co2
Trigger Action:Double/SingleDouble/SingleDouble/Single
Blowback Action:Non-BlowbackNon-BlowbackNon-Blowback
GunSafety:ManualManualManual
GunFrontSight:FixedFixedFixed
GunRearSight:FixedFixedFixed
Material:Full MetalFull MetalFull Metal
Barrel Length:15.2 cm (6 inch)15.2 cm (6 inch)15.2 cm (6 inch)
Magazine Capacity:666
Options:Battlefield FinishBlackSilver

Have you used this product?
Rate it now.

Webley MKVI  455 CO2 Shell Loading Pellet Revolver Field Test Review

Webley MKVI 455 CO2 Shell Loading Pellet Revolver Field Test Review

(189 raters) 7290 views - 1/13/2019 1:28:16 AM
Checkout this post over on the Replica Airguns Website with additional photos:
https://www.replicaairguns.com/posts/2019/1/11/webley-mkvi-455-co2-shell-loading-pellet-revolver-field-test-review-7zkrl

I’ve already full reviewed the BB version of the Webley MKVI .455 CO2 Shell Loading Revolver so make sure to check both my Table Top and Field Test Shooting Reviews for the Webley MKVI .455 CO2 Shell Loading BB Revolver.

In this Filed Test Shooting Video Review I test out the Pellet version of the Webley MKVI .455 CO2 Shell Loading Revolver to see how well it performs in the Indoor Airgun Shooting Range. I first put 5 shots through my Chronograph to see what the real world fps is and then I shoot a full cylinder of pellets at my paper target setup 30 feet down range so we can get an idea on how accurate the Webley MKVI .455 CO2 Shell Loading Pellet Revolver really is.

For my Chronograph velocity portion of this test I used a brand new CO2 with 8.18 grain Sig Sauer lead pellets, the indoor temperature was around 18 degrees Celsius or 64 degrees Fahrenheit. My Webley MKVI .455 CO2 Shell Loading Pellet Revolver was about to average 351 fps with fairly heavy lead pellets, not bad! IN warmer conditions or using lower weight higher velocity pellets I am sure the fps will get up and over 400 feet per second.

Read the rest of my Written Field Test Shooting Review over on the Blog:
https://www.replicaairguns.com/posts/2019/1/11/webley-mkvi-455-co2-shell-loading-pellet-revolver-field-test-review-7zkrl

Buy the Webley MKVI .455 CO2 Shell Loading Pellet Revolver in Canada:
https://www.replicaairguns.ca/webley-mark-vi-177-cal-6rd-service-revolver

Buy the Webley MKVI .455 CO2 Shell Loading Pellet Revolver in the US:
https://www.replicaairguns.us/webley-mark-vi-177-cal-6rd-service-revolver

Buy the Webley MKVI .455 CO2 Shell Loading BB Revolver in Canada:
https://www.replicaairguns.ca/webley-mark-vi-177-cal-co2-bb-revolver

Buy the Webley MKVI .455 CO2 Shell Loading BB Revolver in the US:
https://www.replicaairguns.us/webley-mark-vi-177-cal-co2-bb-revolver
Webley MKVI .455 CO2 Shell Loading BB Revolver Table Top Review

Webley MKVI .455 CO2 Shell Loading BB Revolver Table Top Review

(733 raters) 106589 views - 6/27/2015 3:10:22 AM
Check out my Webley MKVI .455 Shell Loading CO2 BB Revolver Review Post with additional Photos:
http://www.replicaairguns.com/posts/2015/6/26/webley-mk-vi-455-co2-shell-loading-bb-revolver-table-top-rev.html

-Replica of Webley MKVI .455 Revolver
-4.5mm Steel BB's
-12 gram CO2
-6 Shot Shell Loading Cylinder
-5.25 inch Smooth Bore Barrel
-427 fps
-2.4 Pounds

Another classic shell loading CO2 BB Revolver, nothing wrong with that, I remember a time when finding a realistic revolver, even a modern version was hard to do. Now we have a growing selection of super realistic revolvers that replica their original real steel variation with ultra realism. The Webley MK VI .455 CO2 Shell Loading CO2 BB Revolver is no exception and makes for yet another option if you want a well designed, super functional and ultra realistic classic BB revolver.


Buy the Webley MKVI .455 CO2 Shell Loading BB Revolver in the Canada Replica Airguns Store:
https://www.replicaairguns.ca/webley-and-scott-mk6-177-5-shot-bb-revolver

How are we doing? Give us feedback about this page.